Careful Considerations for Nozzle Care in Direct-to-Fabric printer

Careful Considerations for Nozzle Care in Direct-to-Fabric printer

Blog Article

During the regular operation of a DTF (Direct-to-Fabric printer) printer, the Transfer Film Machine may sometimes face the issue of clogged nozzles. SUBLICOOL Digital is here to highlight some common mistakes to avoid when maintaining the nozzles to prevent damage and to ensure the smooth functioning of your DTF printer.

Avoid Submersion of Nozzles in Cleaning Solutions
Cleaning solutions can be corrosive, so it's important to handle them correctly. Instead of submerging the nozzle, only a small amount of cleaning solution should be introduced into the nozzle for cleaning purposes. The use of unqualified cleaning solutions can lead to further corrosion of the nozzle.

Limit the Duration of Ultrasonic Cleaning
Adhere to standard maintenance practices for the Transfer Film Machine's nozzles. Ultrasonic cleaning can be detrimental to the nozzles if used for extended periods. In cases of severe blockage, ultrasonic cleaning for approximately 3 minutes is acceptable. If the nozzle is not cleared in one session, it's advisable to wait until the nozzle has cooled to room temperature before attempting further cleaning.

Resist the Use of Force for Nozzle Alignment
Nozzles are designed to precise specifications. Whether you are replacing or adjusting a nozzle, always follow the manufacturer's guidelines and avoid applying any external force. Mixing inks from different batches or using substandard inks should also be avoided, as this can alter the color and quality of the ink. Inferior inks can negatively impact the print quality and cause nozzle clogging.

By adhering to these guidelines, you can effectively clean the nozzles of your DTF shirt PRINTER while preserving their integrity and ensuring the continued performance of your printing equipment.